Item No :
KL2072Size (d*D*B) :
16x44.13x7.5x8mmMaterial :
chrome steel Gcr15Lead Time :
normally 5-7 daysPackage :
plastic tube or single box+Carton+PalletMOQ :
100 PCSKL2072 Drawn Cup Roller Bearing for Spinner
⚙️Structural features:
KL2072 roller bearing. Its outer ring is formed by stamping thin steel plates. The bearing is equipped with long and thin rollers as rolling elements. The rollers have a small diameter and a relatively large length-to-diameter ratio. It is equipped with a cage to separate the rollers and ensure smooth operation. Both sides are equipped with sealing rings, which can effectively prevent dust, fibers, and other impurities from entering the bearing interior and affecting its normal operation.
| Size | 16x44.13x7.5x8mm |
| Material | chrome steel Gcr15 |
| weight | 0.065KG |
| Lead time | normally 5-7 days |
| Package | plastic tube or single box +Carton +Pallet |
| MOQ | 100 PCS |
| Shipping Port | Guangzhou, Ningbo, Shanghai |
| Payment | 100% T/T or 30% T/T before production, 70% before delivery |
High load-bearing capacity: The contact area between the rollers and the raceways is large, enabling it to withstand significant radial loads. It is suitable for the rotational support of components such as rollers in textile machinery and can, to a certain extent, ensure the stable operation of the equipment.
Compact structure: Its radial size is small, allowing for reasonable installation in the limited space of textile machinery transmission parts, effectively saving space.
Low friction coefficient: The rolling friction method results in a relatively low friction coefficient, high transmission efficiency, and helps reduce energy loss and heat generation.
Primarily used in the transmission parts of textile machinery such as carding machines and spinning machines. These parts usually have high requirements for the space occupation, bearing capacity and operational stability of bearings. The KL2072 needle roller bearing can well meet these demands.
| 1. Keep clean | 2. Use with caution | 3. appropriate tool | 4. Hot-loading | 5. Be careful of rust |
| Dust will have a bad effect on the bearing, so keep the surrounding clean. | Strong impact during use can easily cause scratches and indentations. | Avoid replacing existing tools, and use appropriate tools. | Bearings are precision parts, so hot installation is recommended. | Sweat on your hands during operation will cause rust, so it is best to wear gloves. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
IPv6 network supportedHi! Click one of our members below to chat on
